You walk out to your backyard, glance at the pool timer, and see it's clearly running — the clock is moving, maybe even showing "ON" — but your pump sits.
Nothing kills a Saturday morning faster than walking out to check your pool and finding the pump silent, the timer dark, and your breaker flipped again.
You finally invested in a pool automation system to make life easier. Now it's not responding, the app won't connect, or your pump runs at random times.
You've tested your pool water, the salt level reads 3200 ppm, and everything looks perfect. But your salt chlorine generator keeps flashing that annoying.
Quick Answer If your pool heater is blowing cold air, the most likely culprits are: low water flow triggering the pressure switch, a thermostat set below.
Quick Answer: If your pool main drain isn't working, the problem is usually a closed or stuck valve, a clogged drain line, or an air leak in the suction.
Quick Answer: Low pool skimmer suction is usually caused by a clogged skimmer basket, dirty pump strainer basket, a full filter, air leaks in the suction.
Quick Answer: A pool multiport valve leaking usually comes from one of six spots: a worn spider gasket (most common), cracked O-rings on the handle stem.
